Machined Billet Battery Hold Down Clamps for Toyota & Lexus Models
Machined Billet Battery Hold Down Clamps for Toyota 4Runner (4th Gen & 5th Gen), Toyota FJ Cruiser (2007-2014), Lexus GX460, and Lexus GX470
There's nothing wrong with the stock battery hold downs, but if you're like me, you want to mod everything. With that being said, one simple yet tasteful mod is an aftermarket battery clamp by yours truly... Agency 6.
These machined billet aluminum battery hold down clamps are not only stronger than the factory clamps but more aesthetically pleasing as well. If you have any other Agency 6 products then you know that these are made with the highest quality in mind.
This battery hold down is a must-have for anyone who is addicted to modding every single part of their 4Runner, or Lexus. Additionally, these clamps match a majority of other products made by our team here at Agency 6, such as our winch shackles, and grab handles.
Aftermarket Battery Hold Downs
Aftermarket battery clamps are a great way to personalize your engine bay.
Many aftermarket battery hold downs are designed to be much stronger than the factory clamps.
Upgrading to a stronger battery hold down is not a bad idea especially if you plan on doing quite a bit off off-road driving.
Agency 6 Battery Hold Down
This aftermarket battery holds down uses the factory battery hold down hardware. We provide two stainless steel nuts and two black nylon washers to ensure the aftermarket battery clamp fits the same if not better than stock.
One of the things that sets us apart from our competitors, is the fact that we make all of their products right here in the U.S.A.
These high-quality battery hold downs come in two different anodized finishes to choose from so you can dial in your engine bay aesthetics.
Color Options
Final Thoughts
At the end of the day this is one of those mods you aren't going to see a lot of the time, but one that's worth having.
The anodized grey looks incredible in our engine bay, and matches the color of the battery pretty well.
2 Responses
Michael G.
This fit well as a battery hold down for my Land Rover Discovery 2. Great quality and it still holds the anodized red color even after 4 years under the bonnet while going through mud and dust.
I’m glad the American flag is shown on it when I display my V8 engine bay while at Land Rover shows here in England.
Cheers!
Leave a comment
Comments will be approved before showing up.
Also in Blog
, Toyota FJ Cruiser (2007-2014), Lexus GX460, and Lexus GX470
There's nothing wrong with the stock battery hold downs, but if you're like me, you want to...&media=//cdn.shopify.com/s/files/1/1356/6821/articles/Agency-6-Battery-Hold-Down-2_600x.jpg?v=1628114325){kind=link}
Scott
November 18, 2022
This is an incredible looking product and would really appreciate knowing if you have something like for a 3rd gen Tundra…2014.
Thank you.